Cart

Genuine Dealer
Auto Parts for Less!

Home > GMC > Terrain

Find by Pricing Below 49 (1)49 to 86.99 (1)87 and Above (2) Find by Brand Genuine OEM (4)

Make Your Selection Below: Exterior Interior Mechanical

Sort by: Price: Low to High Price: High to Low Most Popular Title Manufacturer Newest Oldest Availability 10 per page 20 per page 40 per page 60 per page 100 per page Page of 1 2010-2012 GMC terrain new front license plate bracket Genuine Our Price: $22.95 Brand new Genuine Front License Plate Bracket for 2010-2012 GMC Terrain. This is a custom front license plate bracket that will only fit the front bumper. The bracket does not include the hardware or instructions for installation. 2010-2011 Chevy Equinox GMC terrain cargo area net Our Price: $49.95 Even more efficiency enhances the elegance of your GM with this Cargo Net in black. It attaches easily to the sides of your cargo area to keep small, light items neat and handy while in transit. 2010-2012 GMC Terrain 4 piece splash mud guard kit Molded Genuine GM Our Price: $87.95 Help protect your Terrain from tire splash and mud with these Splash Guards that fit directly behind your wheels. 4 Pice set 2 front and 2 rear. Includes hardware. Installation Instructions (GM Does not include instructions in the box, so print these out before your purchase). *** SOME 2012 MODELS MAY REQUIRE DRILLING*** Front Instructions: 1. The front splash guards can be installed by turning the front wheels to access the    rear of the wheel well. 2. Clean the lower rocker plastic panel with the provided alcohol wipes where the double    sided tape on the splash guard makes contact 3. Remove the bottom 2 push pins.  These pins come out by pulling out the center of    the pin and then prying out the outer push pin body. 4. Pull out the fender liner and slide the tinnerman clips over the holes in the lower    plastic rocker panel. 5. Install the splash guard using 2 screws into the tinnerman clips.  Adjust the splash   guard so it is tight against the rocker panel where the double sides tape is located.   Also make sure the plastic tab for the double sided tape is sticking out so you can   pull it off. 6. Using a hand screwdriver, drive the upper screw into the fender liner and thru the   plastic rocker trim panel.  The screw will make its own hole, no need to drill. 7. Again with a hand screwdriver, drive the lower vertical screw thru the plastic rocker    trim panel. 8. Last, pull the plastic tab to expose the double sided tape and press firmly against   the plastic rocker trim panel. FOR SOME 2012 MODELS THE HOLES WILL NOT LINE UP, YOU MAY HAVE TO DRILL TWO HOLES IF THE INSTRUCTIONS BELOW DO NOT WORK FOR YOUR 2012 MODEL. The rear pair includes a hardware pack with 6 screws and 6 tinnerman clips. Rear Instructions: 1. You need to remove the rear wheels to install the rear splash guards.   2. Clean the lower rear plastic trim panel with the provided alcohol wipes where the double    sided tape on the splash guard makes contact 2. Remove the bottom 2 push pins.  The lower push pin will receive a screw and the upper    one makes it easier to pull the fender liner away. 3. Pull out the fender liner and slide a tinnerman clip over the bottom push pin hole in the    rear lower plastic trim panel.  For some reason our Terrain already had a clip installed    in this hole on the left rear  but not on the right rear. 4. Install the splash guard using 1 screw into the tinnerman clip.  Adjust the splash   guard so it is tight against the rocker panel where the double sides tape is located.   5. Using a hand screwdriver, drive the a screw in the upper splash guard hole thru the   fender liner and the rear lower plastic trim panel. 6. Remove the 2 mounting screws and put a tinnerman clip on the rear lower plastic   trim panel over the hole you just created.  This may be overkill but it allows the   upper screw to bite into the metal tinnerman clip instead of just into the rear plastic   trim panel. 7. Reinstall the splash guard using the 2 screws into the tinnerman clips.  Adjust the splash   guard so it is tight against the rocker panel where the double sides tape is located. Also   make sure the plastic tab for the double sided tape is sticking out so you can pull it off. 8. Again with a hand screwdriver, drive the lower vertical screw thru the rear plastic    trim panel. 9. Reinstall the push pin into the upper hole by pulling out the center most of the way,   inserting the pin and push the center back in. 10. Last, pull the plastic tab to expose the double sided tape and press firmly against     the rear plastic  trim panel. You will have some tinnerman clips left over in the rear.  It would have been nice to use them on the vertical screw but it is located too far into the panel for the clip to reach the hole.  You should have 2 left over tinnerman clips, I had 3 due to the one rear side already having one installed.  I'm thinking about using the 2 remaining tinnerman clips on the upper screw on the front guard, but I need to look and see if there is any way to slip it over the lip on the lower rocker plastic trim panel. Total install time was around an hour. I know this is long and drawn out but hopefully it will help if you have questions about the install.  Assuming you can jack up the Terrain to remove the rear wheels, it is much better to install yourself rather than paying dealer labor rates of $75/hour. The splash guards look great and exactly match the color and texture of the lower plastic rocker trim panel. 2010-2011 Chevy Equinox GMC terrain chrome door handle kit Our Price: $130.95 Add a luxurious touch to your GM with these stylish Chrome Door Handles to replace the stock handles. 4 real handles, not stickers or covers. Includes instructions.