2007-2011 Toyota Camry Sun Visor Genuine Japan Built Only OEM
2007-2011 Toyota Camry Sun Visor Genuine Japan Built Only OEM



 
Additional Photos:




Price: $199.95

VIN Ensures Correct, Color, Size, And Style.


Genuine Part

3 Year Warranty

Order By Noon For Same Day Shipping

Currently: In Stock


Side

Left (Driver Side)
Right (Passenger Side)
VIN number

Enter 17 Digit VIN Number*:

Your VIN provides us the color and all other options on your vehicle. No Need to Provide any more info!

The VIN Ensures with 100% accuracy that the part you purchase will fit your vehicle.

When you include your Correct 17 Digit VIN Number with your order, One of our parts experts will check your VIN to be sure this part is an exact fit for to your specific vehicle before shipping your order. 

Super Simple Process

There is No Need to provide any other information, Your VIN tells us everything about your vehicle, (Including Interior and Exterior Colors).

Where to find your VIN Number

The VIN can be found on your insurance card, Insurance App on your phone, vehicle title, or by looking at the lower driver side dashboard from outside the vehicle.



Qty:
About The Part
 
Note This will only fit Camry Built In JAPAN that was sold in the USA. The first digit of your VIN number will be a J if built in the JAPAN

If you have a 4 as the first digit of the VIN (USA Built). This Visor will not fit and you will need the USA built version available
HERE

Fits any 2007-2011 Japan built Camry Including Hybrids.

Your VIN number is required. There are 48 Different color, style, and size combinations to this visor. Please put your 17 digit VIN number in the box when adding the visor to your cart. Leaving the VIN number Field blank or typing anything else in the field will only delay your order. The VIN allows us to send you the exact visor for your Car, and there is no chance for mistakes.





The Original Problem

Do you have a 2007-2011 Toyota Camry? Is the visor falling down and obstructing your vision?

The original sun visors installed in these cars had a major problem. The visor will not stay up and it constantly falls while driving or running over a bump. Its not just your car, every Toyota Camry manufactured in these years has the same problem. The support rod loses tension over time, and begins to lose grip.


Our Solution

We are selling a completely revised Genuine Toyota Visor that will not fall down, and will not lose tension. The new visor is completely redesigned internally by Toyota engineers to never fail again. This is the 4th and Final revision of this visor, and has excellent reliability compared to the last 3 versions.

Be wary of sites selling the old versions for a low price, you will have the same issue with the visor falling within a few months of purchase.

When you make your selections in the drop down menu, you will receive the exact configuration that is in your car now, pertaining to color, lights, Fabric etc..

installs easily with a flat blade and a Phillips screwdriver

matches your interior fabric color exactly.

Comes sealed in Genuine Toyota Packaging.

Factory Fresh Direct From Toyota




Repair Procedure
Removal:
1. Disengage the 4 claws from the sunvisor plastic
2. Remove the plastic bracket cover and set aside for later installation.
3. Carefully pull straight down on the Sunvisor
sub-assembly and remove it from the opening in
the metal roof panel.
NOTE
If the attaching clips remain in the metal roof
panel, pinch the clip tabs together and rotate
away from the connector as shown in Figure 3
(if equipped with a vanity light), then remove
the clips and reinstall the clips back into the
sunvisor bracket from the direction shown in



Installation Procedure:
1. Partially install the bracket cover into the sunvisor
bracket making sure both temporary set claws are
engaged.
NOTE
Make sure to ONLY partially install the bracket
cover into the bracket during installation,
because damage to the clip, sunvisor mount or
roof sheet metal tabs may occur if the bracket
cover is fully in the sunvisor bracket.


2. Install the sunvisor assembly into the opening
in the sheet metal roof panel by grasping the
sunvisor assembly with two hands and pushing
the bracket upward

3. Make sure the sunvisor bracket is flush with the
headliner all away around the perimeter of the
bracket as shown in Figure 7 and then push the
bracket cover upward to engage all 4 claws at the
same time.


4. Confirm the proper operation of the sunvisor and the operation of the vanity light.
Additional Information

First Time Shopping With Us?

Watch a Short Video About Us and See What We're All About.

Our 30 Day Satisfaction Guarantee is Simple:


Take up to 30 days to examine and use your part If during the 45 days you feel the Auto Part you bought from us is not of the absolute, highest quality in both function and craftsmanship, We will make it right with a refund or a replacement.

More About Our Parts:

  • Our Parts are Top of The Line-Premium Grade Auto Parts. This is not your average, everyday auto part found at your local chain auto parts store.
  • Our Parts are 100% Genuine and are Factory Fresh.
  • This Part is the Exact Same Part you would purchase at your local new car dealership, which includes all of the latest updates and revisions.
  • We personally inspect each and every part for quality before we send it out to you.