Genuine Honda License Plate bracket for the Front License Plate on 2000-2009 S2000.
If you'll notice in the pictures, this bracket is formed to fit the exact curvature of the bumper.
Customers are reporting a install time of about 30 minutes. You will notice that this bracket does not come with any hardware. For some strange reason Honda / Acura does not include any hardware with their license plate brackets. With this being said you can go about this two different ways.
The first way is you can just go down to your local hardware store and get some self tapping screws and drill some pilot holes in your bumper and install this directly to the bumper using the screws. This is the way that most people do it and is the most simple and most affordable way.
The second way to do it is to do it Honda's way. You can go to a Honda dealership and purchase the hardware you need. The problem with this is that Honda sells each screw, nut, bolt and clip separately. Usually when doing it this way hardware will cost much more than the bracket itself does.
We recommend you do it the first way is it is much easier and cost effective.
This bracket is built by the same manufacturer who built your car. This is a genuine part. The Curvature, Shape, and fit will be exact, this is not a generic one size fits all bracket.
Includes Bracket Only, Mounting Hardware is not available.
Instructions are Not Included.
Since each vehicle front end is so different there are no generic instructions available on how to install. You can follow these simple guidelines to help you figure out if it something you can do yourself. Some owners manuals are now including mounting instructions so check to see if yours has them included.
If your front bumper is plastic expect to drill pilot holes for the screws.
Most installs only require a drill and a screw driver.
If your car manufacturer requires rivets for proper install and your kit contains pop rivets: A rivet gun will be required for install. (This is rare). A lot of times you can get around this by just purchasing self-tapping or sheet metal screws from the hardware store and using them instead.
License plate brackets are usually installed easily, and it is pretty much self-explanatory, once you see the bracket and hardware it will seem much easier to do. However if you are not comfortable doing the job yourself, you can have a body shop install it for you, however for this simple job do not allow them to charge you for more than a half hour of work (which is usually the minimum).