Shop By Vehicle  +

Mopar Fan Wiring Harness for 2009-2017 300 Charger Challenger Genuine

68050128AA

Customer Reviews

Based on 2 reviews Write a review


2009-2017 Radiator Fan Wiring Harness For:

Note: Does not fit any police package.

2009-2017 CHRYSLER 300 WITH STANDARD & HEAVY DUTY COOLING

2009-2017 DODGE CHARGER WITH STANDARD & HEAVY DUTY COOLING

2009-2017 DODGE CHALLENGER WITH STANDARD & HEAVY DUTY COOLING

Product Features:
Comes sealed in Genuine Manufacturers Packaging.
Factory Fresh. No old or used stock.
Includes the best warranty available at no extra charge.
This is the exact same part sold at your local new car dealership.
Newest Most Up to date Version.
Other Information:
Includes installation instructions? No
What is Included? Unless otherwise specified, what is shown in the product photos is exactly what you will receive.
Includes Warranty? Yes
Includes attaching hardware? No (you can re-use your original hardware). (If Applicable).



REPAIR PROCEDURE

1. Remove the glove box and cover:
2. Disconnect the brown 7P connector (C202) from
the main harness. Remove the YEL/BLK wire
terminal from cavity 3 of connector C202. Cut off
the terminal, and tape the remaining end of the wire
to the harness.
BLUE/RED WIRE
(Cut off the terminal
and tape the end down.)
POWER
TRANSISTOR
YEL/BLK WIRE
(Cut off the terminal
and tape the end down.)
BLOWER MOTOR
CONNECTOR
(Disconnect,
cut off, and tape
down the
remaining wire.)
3. Disconnect the 2P blower motor connector, cut off
the connector, and tape the remaining ends of the
wires to the pigtail. Then tape the pigtail to the main
harness.
4. Disconnect the white 5P connector from the power
transistor. Remove the BLU/RED wire terminal
from cavity 4 of the power transistor connector. Cut
off the terminal, and tape the remaining end of the
wire to the harness.
5. Take the subharness, and insert the YEL/BLK wire
terminal into cavity 3 of connector C202 and insert
the BLU/RED wire terminal into cavity 4 of the
power transistor connector. Tape both wires to the
existing harness. Route the harness so there is no
tension on the blower motor connector.
6. Reconnect connector C202 and the power
transistor connector, then connect the 2P
connector on the new subharness to the blower
motor.
7. Verify the blower motor operates properly at all
speeds.
8. Reinstall the glove box and cover.
Ships From: Texas, USA.
Have Questions? Want to order by phone? Click the contact us link, or give us a call. No Dealership attitudes, We Promise!


Related Items

25
05
2017
03
35
AM